Log skidder plate....?

[L3650]

Here is where I found the idea.

Home Made Log Skidder : The Rural Independent - gardening, alternate energy, cooking, homesteading, home schooling

Many businesses have these for free. Some have suggested car washes, etc.

 

[czechsonofagun]

We used an old car hood, it worked reasonably well and it was free

 

[F.L. Jennings]

We used an old car hood, it worked reasonably well and it was free

+1. Free = best.

 

[studor]

And sometimes the bullet holes in the door or hood are in the right place so you don't even have to drill!!!

 

[MarkV]

We used an old car hood, it worked reasonably well and it was free

Tried that but the wife got upset when I put it back on her Land Rover.

MarkV

 

[Stumppuller]

I use the "U" shaped yolk from my PHD with logging tongs attached to the top link connection. Lower the TPH, adjust the chain, place the tongs over the log & lift the TPH. Only the tail of the log skids on the dirt. Another option is to additionally connect a chain from the drawbar to a lower link in a choke chain. That way if the log snags the pull force will be below the axle.

 

[ChuckinNH]

here is another skidding cone
NovaJack

 

[barrowes]

The link for the home made skidding cone from the Rural Independent seems broken. Can you post an updated link or some pics? Thanks!