locknlube cupler for a grease gun

   / locknlube cupler for a grease gun #11  
   / locknlube cupler for a grease gun #12  
well i dont care what others say... im sick and tired of messing with grease fittings over the years. I just had to mess with one of my loader zerk fittings getting stuck on my gun yesterday. messed with it for 10 minutes trying to get it to release.

$30 does seem a bit much, but im sick and tired of messing with a dirty grease gun. I went ahead and purchased one from Amazon just now.

Ill tell you how i like it when it arrives

Let us know what you think of it.. Heck I have spent more money than something is worth many times.. Two tickets to "Joe vs. the Volcano" comes to mind. Well then there was Frank Zappa's 1000 motels. Now that was 2 hours of my life I wish I had back.
 
   / locknlube cupler for a grease gun #13  
well, im sick and tires of getting my hands and cloths covered in grease from messing with either a leaking fitting connection, or trying to get the gun to release. i hope this helps.

i dont mine paying $$ for something that works

If it doesnt work, amazon will be getting a return
 
   / locknlube cupler for a grease gun #15  
Ok... I got the lock n lube grease coupler in yesterdays mail. Today was the big day. I had to pull all the chains and do maintenance and removal of all my snow equipment.

We have 10 days of 50-60F temps in the forecast, and the ground has thawed 100%, so no use in keeping any snow equipment on the tractor.

The new lock and lube end worked great. Absolutely no grease blowback from the fitting. Every fitting accepted grease. Very easy release. And best thing yet. after greasing about 30 fittings, not a spec of grease on my hands.

Thanks for the heads-up about this product. in 100% satisfied. This was the easiest and cleanest re-grease Ive ever done.
 
   / locknlube cupler for a grease gun #16  
Ok... I got the lock n lube grease coupler in yesterdays mail. Today was the big day. I had to pull all the chains and do maintenance and removal of all my snow equipment.

We have 10 days of 50-60F temps in the forecast, and the ground has thawed 100%, so no use in keeping any snow equipment on the tractor.

The new lock and lube end worked great. Absolutely no grease blowback from the fitting. Every fitting accepted grease. Very easy release. And best thing yet. after greasing about 30 fittings, not a spec of grease on my hands.

Thanks for the heads-up about this product. in 100% satisfied. This was the easiest and cleanest re-grease Ive ever done.

Thanks for the report.. I gather that you like it!
 
   / locknlube cupler for a grease gun #18  
Thanks for the report, just ordered one for myself.
Dave
 
   / locknlube cupler for a grease gun #19  
I kinda thinking of ordering one but i got to try adjusting the one i have. Been greasing equipment for almost 50 years not knowing you can adjust this tip. When i get something new i usually take it apart to see how it was built. Never thought of adjusting it. Thanks for the info . . . .John:confused3:
 
   / locknlube cupler for a grease gun #20  
I never knew about adjusting the tip either, have to try it. grs, interesting fitting, cool
 

Tractor & Equipment Auctions

2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2012 VOLVO A40F OFF ROAD DUMP (A51242)
2012 VOLVO A40F...
2013 Cadillac ATS Sedan (A50324)
2013 Cadillac ATS...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2018 MDB T5E MDB DISC MOWER (A51406)
2018 MDB T5E MDB...
2017 JOHN DEERE 624K-II WHEEL LOADER (A51242)
2017 JOHN DEERE...
 
Top