Loader Feedline - swap to other side

[BeachEx]

I recently bought a John Deere 1070 with a Du-al 165 loader. The hard feedlines run down the right side of the loader, the soft lines run under the tractor and I'm worried about snatching them when bushogging.
I want to run the hard feedlines on the left side of the loader so the softlines will only need to be about 3 feet long and run directly to the hard feedlines.
If I order feed lines for a John Deere loader that run down the left side will that work?

 

[Xfaxman]

Can you reroute the hoses up higher?

Which side is the loader valve on?

Add metal guard over the hoses, so they can't get snagged.

 

[JerryG]

If you don't find any other way you like take it to a Parker hydraulics store. They will use what they can of your parts and then finish it professionally.

 

[BeachEx]

Can you reroute the hoses up higher?

Which side is the loader valve on?

Add metal guard over the hoses, so they can't get snagged.[/

the only way I could re-route the lines higher is up and over the hood of the tractor, not ideal.
I could pull the lines under the tractor up a little but not much.
The quick connects for the loader are on the left side of the tractor, I have a friend with the same tractor but he has a JD loader. His hard feedlines run up the left side of the loader and have short soft lines about 3' connecting.