Loader capacity of 420 FEL on 4200?

   / Loader capacity of 420 FEL on 4200? #1  

Gary_in_Indiana

Elite Member
Joined
Apr 22, 2002
Messages
3,373
Location
Fort Wayne, IN
Tractor
John Deere 4200 MFWD HST w/ JD 420 FEL w/ 61" loader bucket & toothbar & JD 37 BH w/ 12" bucket
Does anyone know the capacity of the 420 FEL on a 4200 MFWD? Thanks.
 
   / Loader capacity of 420 FEL on 4200? #2  
Data from the 420 Operators Manual.

Max vertical loads at 500 mm in front of bucket pivot pin for various heights:

At max height of 80.6 inches -- 757 pounds
With bucket at 59 inches -- 1247 pounds
With bucket on ground using lift cylinders only -- 2141 pounds
With bucket on ground using rollback cylinders only -- 2291 pounds

The loads as measured at the bucket pivot pin are of course much higher, but I didn't quote them since you can't lift anything useful there.

JackIL
 
   / Loader capacity of 420 FEL on 4200?
  • Thread Starter
#3  
I was going to get a tank for on site fueling and thought I'd better find out how much I can lift out of the truck before I get everything, fill the tank with fuel and then find I have to just leave it in the truck till I use some of it. /forums/images/graemlins/crazy.gif

Without splitting hairs, a 150 gallon tank should hold about 1200 pounds in fuel so filling that thing up and lifting it out of the bed of a truck could be cutting it close with the weight of the bucket, tank and frame. Any thoughts?
 
   / Loader capacity of 420 FEL on 4200? #4  
Why not get the empty tank and have fuel delivered? Then you don't have to reload/unload it every time you get it filled.
 
   / Loader capacity of 420 FEL on 4200?
  • Thread Starter
#5  
While I haven't yet checked in to delivery, I assumed that no one would do a free delivery on such a small amount of fuel and that that charge would more than negate any savings. Also, I have a place just over a mile down the road that handles off road diesel so taking the tank to be filled wouldn't be a big deal.
 
   / Loader capacity of 420 FEL on 4200? #6  
Gary,

How much$$ are the tanks, you may be better off getting two tanks and 3/4 filling them. As you said that may be cutting it close and thats one load you don't want to spill.

j
 
   / Loader capacity of 420 FEL on 4200?
  • Thread Starter
#7  
I think I can get one tank free just by taking it off an old International semi tractor I've got out in back. It'll end up at auction and going to salvage as a parts truck or off to Mexico or points south where no DOT guidelines apply. /forums/images/graemlins/crazy.gif
 

Tractor & Equipment Auctions

1993 M989AL HEAVY EXPANDED MOBILITY TRAILER (A57192)
1993 M989AL HEAVY...
3pt Auger w/Bit (A56469)
3pt Auger w/Bit...
2023 HELI CPYD25C FORKLIFT (A58214)
2023 HELI CPYD25C...
1998 John Deere Gator Utility Cart (A55851)
1998 John Deere...
(APPROX 15) 2" X 6" X 20'- 3/8" THICK METAL TUBING (A54757)
(APPROX 15) 2" X...
1997 John Deere 8400 (A53317)
1997 John Deere...
 
Top