Lk3054 questions ?

[ripper980]

Hey ! Owner of 1998 lk3054 here.

Anyone have the proper specs on valve clearance gap ?

Also have a kl128 loader attached. Curious on loader valve hydraulic. pressure at the loader valve @ 1500 rpm..

Thxs !

 

[Patches]

I have a 2004 3054xs; I'm sure the engines are the same TD 1400. The work shop manual lists the valve clearance as 0.18 to 0.22 mm (0.0071 to 0.0097 in) so 7 to 10 thousandths of an inch with no difference between intake or exhaust

 

[ripper980]

Did some searching around and found a LK3054XS manual ...
It has different tighter specs ... is this an update ? or is yours an update ?

 

[Patches]

I'm pretty sure your researched manual is the updated version as mine does not have the xs notation. The 7 to 10 thousandths should be the correct clearance for your '98 tractor. Thanks for the heads up, as I've not yet checked the clearance on my unit

 

[ripper980]

I'm pretty sure your researched manual is the updated version as mine does not have the xs notation. The 7 to 10 thousandths should be the correct clearance for your '98 tractor. Thanks for the heads up, as I've not yet checked the clearance on my unit

sent you a message ..

 

[Patches]

I don't have the expertise to e-mailing a complete wsm and at 80 years of age have 0 interest in learning new tricks with computers;, sorry; I can barely turn this thing on and off and am (very careful) where I go on it.

 

[ripper980]

I don't have the expertise to e-mailing a complete wsm and at 80 years of age have 0 interest in learning new tricks with computers;, sorry; I can barely turn this thing on and off and am (very careful) where I go on it.

I sent you another message sir.