jasperab
Bronze Member
Arms were slow to drop to begin with, now not dropping at all. Tried hooking up heavy blade and got them to come down once, but when I started tractor they came back up all the way and won't drop.
Lift arms on MF TO35 not dropping down
- Thread starter jasperab
- Start date
- Views: 525
RNeumann
Elite Member
Have you adjusted the flow/speed control between your legs (typically) when seated?
Dave M7040
Elite Member
- Joined
- Dec 10, 2012
- Messages
- 2,757
- Location
- Williamstown Ontario Canada
- Tractor
- Kubota M7040 Nuffield 465
This is a question not a statement.
Position control on some tractors confuses owners. Sometimes the position control, if present, is a second lever apart from the main lift lever.
If the position control is set to a high position, it will slowly raise the 3 pt arms to where it was set regardless of the main control.
Dave M7040
Position control on some tractors confuses owners. Sometimes the position control, if present, is a second lever apart from the main lift lever.
If the position control is set to a high position, it will slowly raise the 3 pt arms to where it was set regardless of the main control.
Dave M7040
Harry in Ky
Veteran Member
Check your PM inbox.