LED

   / LED #11  
I too think the factory headlights are pretty useless. I wound up with 6 mounted LED's- 3 on each side of the ROPS, on brackets bolted to the folding hardware, so no holes in the ROPS. One forward, one to the side and one rearward for each side. All three pair on separate switches. Works fine, as needed. But since there's almost no real snowfall the past few years, no plowing required. I won't miss plowing at night to stay on top of a blizzard! The lights themselves were carefully selected from the many available on eBay, none very expensive, about 7-8 years ago. So far, absolutely perfect. I have a digital voltmeter monitoring alternator output, and with all the lights on, plus the OEM flashers, I still have charging voltage. But just barely.
 

Attachments

  • P1010877.JPG
    P1010877.JPG
    2.3 MB · Views: 144
   / LED #14  
IMO, it's not worth the $$ to upgrade the headlights. I do a lot of night work with the FEL bucket which blocks most of the light. Instead, I spent the $$ to replace the four OEM halogen cab work lights with LED's on my L6060 HSTC.

I used these direct replacement lights from Tigerlights:

Quick & simple. Took about 15 minutes to replace all four.
 
   / LED
  • Thread Starter
#15  
Well i got my LED for my driving light man what a great upgrade love it also change my high low head light also a big change much brighter
 
   / LED #16  
I noticed a pattern when buying a variety of things. Almost all factory settings of all equipment are useless or incorrect. When buying, any strings on the guitar are very low-quality and must be replaced. The same is true with headlights on tractors, cars, and motorcycles. I always replace the headlights on new vehicles. My tractor has a smart LED bulb installed on each side, and I'm satisfied with its performance, range, and ease of calibration of light and range. Perhaps you haven't tried this in a tractor yet. You can try it first by car or in your garage. I think many people will like smart lamps.
 
Last edited:
   / LED #17  
Am looking for my head light i have work light just looking for my head light LED bulbs that are bright and fit i no they are H4 .
LED replacements for H4 lamps are readily available, but most are not form identical. The ones that are are quite expensive.

Best to remove entire lamp assembly when changing to avoid damaging plastic parts.

Verify that there is no interference between new bulbs, wiring harness, etc., and underhood components before closing hood.

SDT
 

Tractor & Equipment Auctions

2017 GENIE GTH-636 TELESCOPIC FORKLIFT (A51242)
2017 GENIE GTH-636...
Kenworth T800 Day Cab Truck Tractor (A49461)
Kenworth T800 Day...
KSI Conveyor (A51039)
KSI Conveyor (A51039)
12 FLATBED W/ 300GAL WATER TANK (A50854)
12 FLATBED W/...
MAGNUM PRODUCTS LIGHT TOWER (A50854)
MAGNUM PRODUCTS...
3in Poly Pipe (A49461)
3in Poly Pipe (A49461)
 
Top