torrin
Bronze Member
Good morning;
I recently purchased a BX2230D. The previous owner told me there was a "small" leak when you raised/lowered the MMM deck and left the lift control out of the neutral position. He stated that he could not find the leak, but it left spots on his garage floor.
I found the leak. It is coming from the control valve and or lift block. The is a block that attaches to the valve and controls up/down of the MMM. I replaced the O-rings, removed and reinstalled the fittings and the leak is still there.
There are no obvious cracks in the control valve or the block, the leak is of such a volume that the crack (if any) should be obvious, and no cracks in the fittings. the leak is not getting better or worse.
I'm stumped. Any Help would be greatly appreciated.
I recently purchased a BX2230D. The previous owner told me there was a "small" leak when you raised/lowered the MMM deck and left the lift control out of the neutral position. He stated that he could not find the leak, but it left spots on his garage floor.
I found the leak. It is coming from the control valve and or lift block. The is a block that attaches to the valve and controls up/down of the MMM. I replaced the O-rings, removed and reinstalled the fittings and the leak is still there.
There are no obvious cracks in the control valve or the block, the leak is of such a volume that the crack (if any) should be obvious, and no cracks in the fittings. the leak is not getting better or worse.
I'm stumped. Any Help would be greatly appreciated.
