3-Point Hitch Landpride QH05 and QH10 Rear Snowblowers Compatibility

[robertm]

I am considering a quick hitch for ease of hooking up a Heavy-Hitch for ballast and receiver use (Deathtoblackberries confirmed QH10 already), Landpride 1560 rear blade, and Kubota rear 51" blower.
Question is, the rear blade is marked quick hitch compatible, but what about the blower? It's a Kubota, but LP makes them now. I know the PTO will require manual hookup, but what about general chassis?
I'm not getting any younger, and the ease of the QH to snag the ballast anytime, would reduce me being stupid and pulling an "Oh, this'll only take a minute" and engaging a severe pucker factor. Also, I will be using the rear blade for snow removal, primarily, but a quick change for the rear blower when a heavy snow is forecasted, would work well.

 

[LouNY]

I didn't like my quick hitch because of the restriction in getting to the pto.
I'm a large person and trying to hookup the pto with the restriction of reaching inside of the quick hitch made it quite difficult and mine was a cat 2.

 

[robertm]

I'm second guessing it. I will likely have the rear blade and ballast on roller dollies. That makes it easy.