LA403 loader hydraulic coupler interchange with others?

[poosniffer]

Good morning fellow Kubota owners.I have purchased a 3 point hitch log splitter that will require hydraulics.I would like to use power from one of the loader ports at the front of the tractorandrun the hoses back to the splitter.my question is,are the hydraulic couplers that you disconnect to remove the loader a standard fitting or are they a Kubota specific part that I will need topurchase from the dealer.Thanks in advance for any help with this.Best wishes.-Andy.
ps... I posted this in another section as well hoping for more exposure.Thanks.

 

[J_J]

Look on the QD, and there should be a number.

Look at all the QD manufacturers and you might see a cross over chart.

You can also remove one of the QD and take it to your dealer or a hyd shop and they might match it.

You could also look here.

1/2" NPT FLUSH FACE QUICK COUPLER SET ISO 16028

SafeWay Agricultural O.E.M. Interchange Couplers and Tips

Interchange - SafeWay Hydraulic

 

[poosniffer]

Thanks for the link JJ.I think you are on the right track.i posted my question elsewhere on here and was told the fittings are ISO.