L3901 Rear Wheel Adjustment-No Spacers Needed!!

[teg]

Thanks for posting them for me teg!!

No problem, glad to help... That tractor is way too clean I like the fire extinguisher attachment point!

If I use the insert image icon in "regular reply mode" it doesn't work....

It worked for me... Have you updated Adobe Flash Player? That was blocked so I had to "accept the risk" and run it anyway. Only thing I can think of...

 

[ovrszd]

They are actually after and before shots respectively in each post. Good eye....They were definitely in the narrow position and now they are at the widest.

New tractors are almost always shipped in the narrowest position. If the dealer doesn't move them out for the buyer, that's what he ends up with.

I run my tractors at the widest position possible for the equipment I use. Tremendous gain in stability and ride.

 

[The Deerslayer]

Resize test a success!! Thanks for the tip.
Too bad TBN made this change...a tad inconvenient to resize pics every time to post.

ATTACH=CONFIG]452389[/ATTACH]

 

[s219]

They are actually after and before shots respectively in each post. Good eye....They were definitely in the narrow position and now they are at the widest.

Ok thanks, I can see that better now, can see the difference before and after, quite a difference.

 

[KBinCT]

OK resizing the photo let me upload it.. No problems now..

Pic of my L3901 with 3" spacers....

 

[The Deerslayer]

OK resizing the photo let me upload it.. No problems now..

Pic of my L3901 with 3" spacers....

View attachment 452404

What is that you have mounted on the left side of the ROPS? Work light?

 

[teg]

Resize test a success!! Thanks for the tip...

There are better ways to "resize"... the photos that you e-mailed me came in at 16 megs. If you look at my photos, they are all under 280 kb each (just over 1 meg total). From someone that runs on an air card, I like the "smaller" photos, byte wise...

 

[Ryansweatt2004]

Resize test a success!! Thanks for the tip.
Too bad TBN made this change...a tad inconvenient to resize pics every time to post.

ATTACH=CONFIG]452389[/ATTACH]

How do you like that lower link quick attach system?

 

[KBinCT]

What is that you have mounted on the left side of the ROPS? Work light?

The wires are going up to some LED lights on the ROPS and the toolbox hangs over the left fender. I bought the lights from Strobes N' More in Westerly RI and the wiring harnesses came from Amazon..

The lights are a combo of spot and flood and are wicked bright. Strobes-N-More-EFlood-9600-Xtreme-Warning-Light.html

 

[The Deerslayer]

How do you like that lower link quick attach system?

Very much so. Makes hook up a lot easier. They have videos on line....check it out.