L3710 Front Axle Bevel Gear Case removal

   / L3710 Front Axle Bevel Gear Case removal #1  

Woodsman123

New member
Joined
Apr 11, 2015
Messages
2
Location
Mohawk Valley NY
Tractor
Kubota L3710 GST
Hi all,
I have a leak it appears at the bottom of the case of my right front bevel gear case. Also when I had previously changed the gear oil I noticed some metal shavings in the oil. I found this post to be great info but I was wondering if I could just remove the whole bevel gear case from the Axle case and bring it to the dealer and have them disassemble it and diagnose what needs to be repaired. Thanks!
 
   / L3710 Front Axle Bevel Gear Case removal #2  
Is there noise or visible looseness? If not but you're concerned about the filings, taking the bevel case off the axle may not be useful. A technician would likely prefer to inspect the tractor whole, diagnosing it with and without load etc. If the only present symptom is an oil leak, apparently just at the bottom, the easiest cure is to pry out the C plastic plug and tap in a new one.
 
   / L3710 Front Axle Bevel Gear Case removal
  • Thread Starter
#3  
Thanks! I'll try to just replace the plug and go from there.
 

Tractor & Equipment Auctions

2013 Ford F-150 4x4 Ext. Cab Pickup Truck (A48081)
2013 Ford F-150...
2008 International CF500 Electric Lift Service Truck (A48081)
2008 International...
2006 INTERNATIONAL MA045 DAY CAB (A51219)
2006 INTERNATIONAL...
2014 COTTRELL CX-09LS2 AUTO HAULER (A51222)
2014 COTTRELL...
2014 UTILITY 53X102 DRY VAN TRAILER (A51222)
2014 UTILITY...
2016 HITACHI ZAXIS 210LC-6N EXCAVATOR (A51242)
2016 HITACHI ZAXIS...
 
Top