L3450 work lights

   / L3450 work lights #1  

L3450

Bronze Member
Joined
Sep 9, 2007
Messages
50
Tractor
1992 Kubota L3450
Need some advice on wiring /switch for rear work lights . Previous owner installed lights on ROPS and connected to exsisting wires on rear fenders .
Lights work fine but draw power as soon as the key is either turned on or turned to glow plug position.

I'm no mechanic and wiring is a challenge so i'd very much appreciate some advice on how to properly install a switch into the circuit .

As the lights work fine and have now for a year would i be safe mounting a switch in a
pre-exsisting hole (factory plugged) on the left side of the dash and inserting the switch into the circuit between the power source and the (2) added work lights ?
 
   / L3450 work lights #2  
Sure - that would work fine. It would let you turn them off for starting or running the glow plugs.
 

Tractor & Equipment Auctions

50 CAT 5 TOOTH EXCAVATOR BUCKET (A50854)
50 CAT 5 TOOTH...
2019 POLARIS RANGER XP PROSTAR 900 HD DOHC UTV (A51406)
2019 POLARIS...
CFG MH12RX Mini Excavator (A49461)
CFG MH12RX Mini...
Flat Deck Trailer (A50322)
Flat Deck Trailer...
2017 Ford F-250 4x4 Knapheide Service Truck (A50323)
2017 Ford F-250...
2019 Energreen EVO 40 Robotic Tracked Flail Mower (A51039)
2019 Energreen EVO...
 
Top