L3400 heavy duty rear blade

jenrow33 · Jan 23, 2012

Hi Guys. I have had an el cheapo rear blade from TSC for a few years now and have bent it up a bit using it to do dirt work on my long drive. I would like to get a heavy duty angle/tilt/offset blade that is 72" wide. I looked at the Land Pride RB3572 in the catalog but wonder if this is too much blade for my L3400? What would my limitations be for this blade with my tractor? Does anyone have this combination?

Thanks

jenrow33 · Jan 24, 2012

Nothing?

Thanks anyway guys. I have found a lot of good advice on here.

unfinished · Jan 24, 2012

I've not used this blade but I don't think it is too much. I see specs are 6 foot width, 484 lbs, 35-80HP rating. The weight is not a problem lifting, and beneficial for blade performance. Looks like a real nice rear blade.

There are a couple topics in the Attachments forum for this particular blade and it seems well regarded.

Thomas · Jan 25, 2012

Have you check out Woods72...all the same thrills.

wcampbell47 · Jan 25, 2012

Check out this old post.

http://www.tractorbynet.com/forums/attachments/23205-impressed-land-pride-rb3572.html

LD1 · Jan 25, 2012

I got a KK used for $400. It is a 7' blade and is a good match, allthough a 6' would probabally be better. But thats the issue with used, ya get what ya get.

Now before you start rolling your eyes, this isnt a TSC KK cheapo blade.

This things weighs 700lbs and is indestructable behind a L3400.

And the best part too, is that it provides sufficent FEL ballast when doing dirt work. And we all know FEL and rear blade for dirt work go hand in hand, and a 300lb blade just doesnt cut it.

And it is probabally the most affordable HD blade you can find. I have no complaints. It has the tilt feature as well like you mention too.

Heres a link

King Kutter Heavy Duty Rear Blades

Take a good look. You'd be hard pressed to find a heavier duty 6' blade without spending a small fortune.