Joe Hickerson
Silver Member
FB on operating from a Park, the Scouts and being a VE! I need to get my CW speed up to par...
Kubota RTV1120 2 meter ham radio install
- Thread starter stevewarner1957
- Start date
- Views: 3503
Jchonline
Elite Member
- Joined
- Feb 19, 2018
- Messages
- 2,843
- Location
- Red Feather Lakes, CO
- Tractor
- Kubota L6060, KX040-4, M7060, X1100C, M62(S)
Advanced Extra and VE here in CO. Mainly HF, but I do have some VHF rigs. Feel free to post more pictures of the setup!
OP
stevewarner1957
Gold Member
I really enjoy CW, I understand it’s not for everyone but it’s old school and the roots of our hobby. I encourage hams to at least try it. Many more learning resources now than when I learned back in 1972!
OP
stevewarner1957
Gold Member
Here’s the CM200. The mount was made with 2” exhaust clamps welded to angle iron. Used power pole connectors
OP
stevewarner1957
Gold Member
Antenna is a nmo baseView attachment 704662
Last edited:
Smokeydog
Elite Member
Wife and I got our license a few years ago. Have some dead cellular spots on the farm. Several good local repeaters. Station to station works good. Use HT Yaesu radios work well in the wooded, dusty tractor environment. Hooks on the ROPS. Can be hosed off.
KM4LVU
KM4LVU
OP
stevewarner1957
Gold Member
I have a Yaesu FT3D and two FTM400 units. I really enjoy C4FM digital mode. There are a few repeaters I can hit that allow Fusion digital. The other day I was in my car talking with a gentleman in Scotland. Amazing technology for sure.
Joe Hickerson
Silver Member
Steve, if 'ya get tired of one of those FTM 400's, let me know!!
OP
stevewarner1957
Gold Member
Will do!
LarryS
Member
N8QNM here. Never thought to mount a 2m mobile on my tractor. Wouldn't be of much use here since you can holler from one end of the place to the other due to the low signal to noise ratio out here. But if I took the tractor someplace else it could be a real benefit.
Larry N8QNM VE and K2BSA staffer.
Larry N8QNM VE and K2BSA staffer.
