Kubota RTV 1140 cpx

[Pat2288]

Trying to diagnose kubota why it doesn稚 move forward and reverse in 2 wd but it moves in 4wd need help if anyone has had this problem before thanks.

 

[TBN Support]

:welcome:

Welcome to the forum!

I'm going to move this thread over to our Kubota section to see if we can find you an answer.

 

[arits74]

my buddy had same problem and both the back hubs were stripped out.its a common problem on them from what we were told

 

[JOHNTHOMAS]

my buddy had same problem and both the back hubs were stripped out.its a common problem on them from what we were told

I have a RTV1140 that I've owned for 8 years with zero issues other than learning how to depress brake pedal to shift gears, apply emergency brake and hand pressure on lever from 2 to 4wd till it just slides in or do it stopped. I've been a member on this forum for about 12 years and never heard of this issue personally or here on this Kubota forum.

 

[Tx Jim]

my buddy had same problem and both the back hubs were stripped out.its a common problem on them from what we were told

If problem isn't stripped rear hub then I'll guess broken rear axle or spider gears/shafts in rear differential.

 

[RickB]

If problem isn't stripped rear hub then I'll guess broken rear axle or spider gears/shafts in rear differential.

Yup^^
The rear hubs on X900, X1120 and X1140 are the same and I have not seen a stripped hub yet. The rear hub recall pertained to a material change in the hub housing.

 

[AllDodge]

Check the 2 to 4 shift linkage, probably not moving the full distance needed