Kubota paint

[Bowhunter]

I know this subject has been covered many times, and it usually comes down to Kubota labeled paint and Chevy Engine Orange.

I just wanted to give a heads up to anyone looking. I picked up a gallon of Majic brand farm implement paint in Kubota Orange at Rural King over the weekend for $16.99. I used it to paint my carry-all and it looks like a perfect match for my BX2200. I will eventually use it to paint my disc and rotary cutter also because the paint is a little thin on these attachments....and they might as well match. /forums/images/graemlins/wink.gif

 

[jmc]

Do they sell it in spray?

John

 

[MadReferee]

Agri-Supply sells it in spray cans. See Page 32 of the March catalog. part # 60861, $3.59 per 10oz can.

Agri-Supply

 

[Bowhunter]

</font><font color="blue" class="small">( Do they sell it in spray?

John )</font>
I didn't see it in spray cans at the Jasper Rural King, but others may have it.

 

[bota4x4]

Been performing some mods to my BX-22 such as bucket hooks and found that X-O Rust brand type "XO-27 Orange" bought at Wally World is almost a perfect match. There is also a number code on the can 527242. Just an FYI

 

[NoviceguyInCT]

Tractor Supply Co. has Kubota spray paint for $3.99 a can. Good size can too.

TSC may have the paint in quarts and gallons too. I wasn't look for it in that size.

Have a great day.

 

[mj1angier]

I picked up 3 cans at Agri-supply yesterday.

I can now pait the town <font color="orange"> orange </font> /forums/images/graemlins/laugh.gif

 

[Singlecoil]

I bought the Krylon Farm and Implement Paint at NAPA in Kubota orange but it does NOT match. I ordered some from Agri-Supply and the Krylon stuff is going back to the store.

 

[EastTexFrank]

I wish I'd known that when I paid over $9 a can at the dealer. Sometimes I'm just stupid. No comments please. /forums/images/graemlins/mad.gif

 

[BubbaJr]

I went to TSC and bought their "Kubota" orange. Then promptly made a 25 mile round trip to take it back. It was way too yellow. I finally came to my senses and went to my Kubota dealer and got a can that was a perfect match. If you want it to look right, a few extra dollars won't mean much in a few months when you get tired of looking at the mis-match. Of course this is just my opinion, and worth exactly what you paid for it. /forums/images/graemlins/grin.gif

Good Luck,

 

[Ob1kubota]

Bowhunter... I agree with your analogy, I took a panel shield to LOWES from my ZD21 during a ROP installation and they matched the shade perfectly with their computer based spectrum analysis scanner. It was their in house brand of a good oil based enamel that cost 24.95 per gallon. I thinned it with mineral spirits and it sprayed flawlessly. /forums/images/graemlins/wink.gif

 

[BLEED5]

/forums/images/graemlins/blush.gifi I think the old saying is you get what you pay for. I beleive you will find the factory Kubota paint to cover better and last longer than any aftermarket manufacturers paint will. Just my opinion.

 

[Ken_CT]

Just a observation about Chevy engine orange spray paint. It comes in more than one shade. Dupli-Color #1620 is the one that matches the BX23 pretty well. Kubota has two colors of orange spray paint and both are a poor match.