I have a 2010 Kubota mx5000. I had a safety switch problem the other day. I towed the tractor maybe 2000 feet. Got the switch problem fixed but now it acts like it is not getting diesel and won’t start. Has fuel before and after the fuel filter. I am going to change out the stop fuel solinoid Saturday. Any other ideas would be appreciated.
Kubota not getting fuel
- Thread starter M.Long
- Start date
- Views: 589
sea2summit
Elite Member
Any error codes? There is a cable that senses fuel pressure with a connector that's known to cause issues like you describe. Mine wouldn't do anything other than idle and would die when you tried to move. Cleaned the connector and good as new.
sea2summit
Elite Member
Looked up my thread, maybe it will help. As I recall the sensor plugs to a cable but there's another junction that was the issue which sits behind the engine in front of the instrument cluster and it was a small hassle to reach but I don't think I had to remove anything.
Instrument fault reset? Help!
Yesterday the spousal unit and son were cleaning up the yard a bit in prep for Hurricane Matthew and the boy was using my MX to move chicken coops. They says there was a little puff of smoke and he shut it down. Didn't say there where any noises or anything else. He's young so my standing...
www.tractorbynet.com
