haggus
New member
Approximately 1996 model runs all day long at low <2000 rpm but when I idle up to engage the PTO it immediately overheats. Thermostat / radiator / other. I am new at this and any help is welcomed.
Kubota L3710 overheating
- Thread starter haggus
- Start date
- Views: 2910
-
- Tags
- kubota l3710
Jerry/MT
Elite Member
- Joined
- Feb 2, 2008
- Messages
- 3,141
- Location
- North Idaho-The Palouse
- Tractor
- New Holland TD95D, Ford 4610 & Kubota M4500
How have you determined t's overheating? If it's the gauge, have you checked it with a thermometer?
Make sure the thermostat is opeing, the radiator air side isn't clogged with chaff, the water pump drive belt is tight and not slipping, the air cleaner is not clogged, the rad cap is the right pressure rating and is working, the coolant side of the radiator isn't clogged. Look for bubbles in the coolant indicating a head gasket leak.
Make sure the thermostat is opeing, the radiator air side isn't clogged with chaff, the water pump drive belt is tight and not slipping, the air cleaner is not clogged, the rad cap is the right pressure rating and is working, the coolant side of the radiator isn't clogged. Look for bubbles in the coolant indicating a head gasket leak.
