Kubota L3540 HSTC-3 steering valve

   / Kubota L3540 HSTC-3 steering valve #1  

Good With Tools

New member
Joined
Apr 16, 2017
Messages
1
Location
Annandale, NJ
Tractor
John Deere
I recently put a seal kit into the steering valve on my customer's Kubota L3540 HSTC-3. I match marked the sections, disassembled, cleaned, and carefully reassembled. When I installed the valve, and started the tractor, once the steering wheel is touched it started vibrating violently and turned the wheels to the stops. I found a manual for the tractor, but it contains no overhaul instructions for the steering valve. I disassembled and reassembled the valve using the Kubota parts diagram as a guide. When reinstalled on the tractor, same result. I was told by the Kubota dealer I deal with that there is a timing procedure for this component, but I am unable to find timing marks or instructions. Does anyone have experience and advice for this issue.
:confused2:
 

Tractor & Equipment Auctions

2021 Ford F750 (A50120)
2021 Ford F750...
Safety Basket (A50121)
Safety Basket (A50121)
2020 INTERNATIONAL LT625 (A52472)
2020 INTERNATIONAL...
2014 Dodge Avenger Sedan (A50324)
2014 Dodge Avenger...
2022 K-Z Sportsmen 260BHSE 28ft T/A Travel Trailer (A51694)
2022 K-Z Sportsmen...
2018 Ram 3500 Reading Service Truck with Liftgate (A50323)
2018 Ram 3500...
 
Top