winniedog
New member
- Joined
- Jul 15, 2014
- Messages
- 15
My tractor which I bought used last year,(it's a 2000) came with a loader and backhoe. It ran great with no issues
I bought a post hole digger for it and found the 3ph wouldn't work. After going through of service manual I found a note that said I might have reposition a valve to send hydraulic pressure to the 3ph.
I did that and it still didn't work. More reading in the service manual led me to disconnect the feedback rod on the lift unit and I found that I could raise the 3ph with the feed back rod.
I reconnected it and the 3ph worked great.
I finished the fence installation and closed the valve that I opened to get oil to the 3ph and now the loader won't work correctly. It works very slowly.
It seems like the pump is loaded up all the time.
I think the pump is deadheaded and the oil can't circulate through the system.
Anybody else experience this?
Thanks in advance for any suggestions
I bought a post hole digger for it and found the 3ph wouldn't work. After going through of service manual I found a note that said I might have reposition a valve to send hydraulic pressure to the 3ph.
I did that and it still didn't work. More reading in the service manual led me to disconnect the feedback rod on the lift unit and I found that I could raise the 3ph with the feed back rod.
I reconnected it and the 3ph worked great.
I finished the fence installation and closed the valve that I opened to get oil to the 3ph and now the loader won't work correctly. It works very slowly.
It seems like the pump is loaded up all the time.
I think the pump is deadheaded and the oil can't circulate through the system.
Anybody else experience this?
Thanks in advance for any suggestions