Kubota G1800 temp gauge inop

   / Kubota G1800 temp gauge inop #1  

Cobraone

New member
Joined
Nov 12, 2018
Messages
11
Tractor
Kubota B2650
I found the yellow sensor wire broken at the ring terminal behind the temperature gauge, I had to remove the steering wheel and two molex connections to gain access to the back of the temperature gauge

This had been driving me nuts as I knew the overtemp sensor was working and confirmed by shorting the sensor back by the aft water line and the horn sounded.
But I like to know what痴 going on with the temperature and not rely on a over temp horn

Sincerely hope this helps someone in the future
Ray Wolfbrandt
Cobraone
 

Tractor & Equipment Auctions

1992 SYLVAN 20' PONTOON BOAT (A51243)
1992 SYLVAN 20'...
2022 ONYX RX34 FLOOR SWEEPER (A50458)
2022 ONYX RX34...
2007 CATERPILLAR 303.5C CR EXCAVATOR (A51242)
2007 CATERPILLAR...
2011 Autocar ACX64 Xpeditor coe t/a refuse (A52384)
2011 Autocar ACX64...
Redneck Predator 360 Hunting Blind (A50515)
Redneck Predator...
RACCOON TAXIDERMY (A51243)
RACCOON TAXIDERMY...
 
Top