I have a 2000, BX2200. Got a Bestco 3point backhoe on it, I remember somewhere (not sure if it was this group) a gentleman built a subframe for one of the BX models. With numerous pictures. I'll be damned if I can find it now. Does anyone else remember this thread? Or has anyone built a subframe? I remember this one cause the rails mounted to the FEL supports and ran parallel to the frame rails so as to not decrease ground clearance. Thanks in advance.
Kubota BX backhoe subframe
- Thread starter bissonj
- Start date
- Views: 3412
I know the one you are talking about as I remember reading it also. This isn't the same thing, but shows how somebody modified a current Woods subframe to go on an older Woods BH.
www.tractorbynet.com
Perhaps it can give you some ideas?
Woods BH750-2 modified for sub-frame
Found a well kept Woods BH 750-2 with 3 pt. mount and PTO pump. Had an easy life on a 1500 series ( 15 HP @ the Draw Bar ) Yanmar. Able to purchase a current sub-frame for my 1532 Massey from local Woods dealer. In the process of modifying the 750 to adapt to the "New" style frame. Had some...
www.tractorbynet.com
Last edited:
here is link.
www.tractorbynet.com
how to build your own custom backhoe subframe
Not many tractor owners are willing to go thru the process of making a custom subframe to mount a backhoe attachment securely to their tractor. I want to encourage anyonewho is reasonably handy to consider doing this....it is very rewarding, and you can endup with a TLB setup that comes...
www.tractorbynet.com
