Kubota B7610 Engine Starts But Drive and Hydraulics Not Operable

   / Kubota B7610 Engine Starts But Drive and Hydraulics Not Operable #1  

pjmsj21

New member
Joined
Aug 13, 2013
Messages
8
Location
Eugene
Tractor
Kubota B7610
My wife was using our B7610 with our brush cutter when she found that the tractor would not move forward or backward and none of the hydraulics would work. I can easily start the engine but can't lower or raise the front loader, lift the brush cutter or get any movement either forward or backward. I for the life of me cant figure this out.....can you steer me in the right direction?

Thanks
 
   / Kubota B7610 Engine Starts But Drive and Hydraulics Not Operable #2  
Is the range selector in neutral?
 
   / Kubota B7610 Engine Starts But Drive and Hydraulics Not Operable #3  
Sounds as though the Ujoint (if it has them) off the engine broke. Had this happen on my JD 4010. No hydraulics would work because no power goes to the HST unit.

Ralph
 
   / Kubota B7610 Engine Starts But Drive and Hydraulics Not Operable
  • Thread Starter
#4  
The range selector is in the low gear and you can move it from low to neutral to high....so unfortunately that's not it.
 

Tractor & Equipment Auctions

2018 Allmand Night-Lite V-Series S/A Towable Light Tower (A49461)
2018 Allmand...
80in HD Tooth Bucket with Side Cutters ONE PER LOT (A51039)
80in HD Tooth...
2016 GENIE GTH1056 TELESCOPIC FORKLIFT (A51242)
2016 GENIE GTH1056...
2012 Ford Escape XLS SUV (A50324)
2012 Ford Escape...
2013 Chevrolet Malibu Sedan (A50324)
2013 Chevrolet...
1982 LeeBoy Motor Grader (A51039)
1982 LeeBoy Motor...
 
Top