Kubota B7100HST

   / Kubota B7100HST #41  
You can do better than that! Diamond plat ealuminum over a steel 3/4" angle iron frame with plexiglass windows and a heater tied into the cooling system will keep you feeling good during the winter!

c27Ibf3h.jpg
 
   / Kubota B7100HST #42  
You can do better than that! Diamond plat ealuminum over a steel 3/4" angle iron frame with plexiglass windows and a heater tied into the cooling system will keep you feeling good during the winter!
Very nice, but for fast, cheap and easy to install or remove it is hard to beat a golf cart cover.
 
   / Kubota B7100HST
  • Thread Starter
#43  
Cut the yard with the little beast yesterday. Basically halved the time involved, and it didn't rut up or sink in the wet spots as bad as I feared it would. Overall I'm completely tickled with this purchase!

IMG_3513.JPG
 
   / Kubota B7100HST #44  
Cut the yard with the little beast yesterday. Basically halved the time involved, and it didn't rut up or sink in the wet spots as bad as I feared it would. Overall I'm completely tickled with this purchase!
It is an awesome little tractor and will still be running long after a new, $3500 tractor has bitten the dust. One mod I did on mine was to insert a piece of copper pipe into the top radiator hose and soldered a brass fitting that allowed me to install a temperature gauge. I felt a lot better working it hard when I knew how hot it was running.
 
   / Kubota B7100HST #45  
Cut the yard with the little beast yesterday. Basically halved the time involved, and it didn't rut up or sink in the wet spots as bad as I feared it would. Overall I'm completely tickled with this purchase!

View attachment 508569
Gotta love those fat tires for the soft stuff but not so great in the snow.

It is an awesome little tractor and will still be running long after a new, $3500 tractor has bitten the dust. One mod I did on mine was to insert a piece of copper pipe into the top radiator hose and soldered a brass fitting that allowed me to install a temperature gauge. I felt a lot better working it hard when I knew how hot it was running.
That's a good idea.
 
   / Kubota B7100HST #46  
I honesty miss my B7100HST,one of the best B's Kubota made. :thumbsup:
 
   / Kubota B7100HST
  • Thread Starter
#47  
I will definitely be investing in chains before the snow starts to fly this year.

Travelover the top hose on my rad is pretty soft anyway, may have to try that sooner rather than later. Already ordered new blades. Had the deck off today because of the rain and while I was able to make them less dull, whoever had it before me never seemed to have bothered. Chips and gouges galore in all three blades, too deep to get out with my belt sander or files. So I ordered new blades on eBay for $40 for the set. At least the deck is pretty solid underneath I was happy to see, and getting it off and back on was simplicity itself.
 
   / Kubota B7100HST #48  
BIG CONGRATS!!!
As far as "lights" you can buy a couple of LED off road lights, some wire, some neodymium magnets and probably stay under $50.
 

Tractor & Equipment Auctions

2023 Stryker GN3614 36ft. 5 Ton T/A Gooseneck Flatbed Equipment Trailer (A51691)
2023 Stryker...
2020 International MV607 2,000 Gallon Water Truck (A50323)
2020 International...
2013 Ford F-250 4x4 Ext. Cab Pickup Truck (A50323)
2013 Ford F-250...
Army Generator (NOT RUNNING) (A50774)
Army Generator...
Generac Generator (A50774)
Generac Generator...
JMR 72" Root Grapple (A50121)
JMR 72" Root...
 
Top