Buying Advice Kubota B2650 to LX2610
- Thread starter beckmurph
- Start date
- Views: 15079
-
- Tags
- kubota b2650
Carl_NH
Elite Member
- Joined
- Apr 5, 2002
- Messages
- 3,759
- Location
- Coastal NH
- Tractor
- 01 Kubota B21TLB, 2010 Ferris 52" ZTR, Cub Cadet 1811, Gravely Super8
The Kubota numerical Loader designation "LA535" historically has been the KG lift capability of the loader. So you should have gained 1 KG in this upgrade or 2.2 pounds more.
Hope this wasn't the main goal of this upgrade!
Hope this wasn't the main goal of this upgrade!
RickB
Super Star Member
- Joined
- Sep 18, 2000
- Messages
- 15,143
- Location
- Up the road from Dollar General WNC
- Tractor
- Just a Scag
TBN legend? That's new to me.
Johnkn
Platinum Member
Congrats on the new tractor!
Carl_NH
Elite Member
- Joined
- Apr 5, 2002
- Messages
- 3,759
- Location
- Coastal NH
- Tractor
- 01 Kubota B21TLB, 2010 Ferris 52" ZTR, Cub Cadet 1811, Gravely Super8
This has been discussed here before, and you can view this video too Understanding Kubota loader model numbers - TMT - YouTube
RickB
Super Star Member
- Joined
- Sep 18, 2000
- Messages
- 15,143
- Location
- Up the road from Dollar General WNC
- Tractor
- Just a Scag
It would be pretty cool if it were accurate. I checked 3 loader models and quit. Kinda like tractor model numbers and horsepower. Loosely approximated at times, very seldom exact and hardly ever understated. Using either as a purchase guide is not a good idea.
Attachments
Last edited:
OP
beckmurph
Platinum Member
Thank you.
OP
beckmurph
Platinum Member
If you look at the specs in my post, you'll see that the la535 has less capacity than the previous la534.
I want the 2.2 pounds I am paying for! :hissyfit:
I want the 2.2 pounds I am paying for! :hissyfit:
OP
beckmurph
Platinum Member
Well, that is possible , but the
lift capacity (pivot pin)
wouldn’t be affected by the ssqa would it?