Freds
Veteran Member
</font><font color="blue" class="small">( I found that the U-bracket that holds the end of the top link was about 1/8" too narrow to accept the top link ball joint. More work with a prybar and pipe/chisel to get that assembly done )</font>
I bought an extra toplink at TSC that wouldn't fit in whichever implement's "U" I was hooking up at the time. Now that I think about it, it may have even been where it attaches to the tractor where it wouldn't fit.... I modified the toplink's balljoint itself with a hand grinder and a cutoff wheel. It seemed like the least path of resistence.
I also had to add oil and grease my tiller, but the stuff I have boughten from TSC came assembled.
I bought an extra toplink at TSC that wouldn't fit in whichever implement's "U" I was hooking up at the time. Now that I think about it, it may have even been where it attaches to the tractor where it wouldn't fit.... I modified the toplink's balljoint itself with a hand grinder and a cutoff wheel. It seemed like the least path of resistence.
I also had to add oil and grease my tiller, but the stuff I have boughten from TSC came assembled.
