Thanks in advance for all help given I bought this tiller about a month ago for my 2305. Worked great!! But tried to hook up on my 3 point hitch today with no luck. I'm a tractor newbie and I'm kinda lost? I can make the top link and one side pin. But am nearly five to 6 inches off the other side. What am I missing here? I don't have independent lift and my mower is still on. All help appreciated again.
3-Point Hitch King kutter xb on 2520
- Thread starter Mrh51072
- Start date
- Views: 1723
Johndeere3720
Padawan Tractor Learner, Advertiser
- Joined
- Mar 14, 2009
- Messages
- 3,965
- Location
- NW Oregon
- Tractor
- Bobcat T62, MT55, E42R, E10, John Deere 4100
Did you turn the turn buckles on the lower hitch arms? If they arent loosened then you cant pull the arms all the way out.
King Kutter Rep
Bronze Member
- Joined
- Dec 8, 2010
- Messages
- 87
It sounds like your sway chains / buckles are tightened to much. Good luck, and thanks for buying King Kutter!
jon edwards
Silver Member
- Joined
- Mar 25, 2011
- Messages
- 166
- Location
- Lewistown, Montana
- Tractor
- Case Farmall 75C, john deere 1520, Polaris 900 XP
I just bought a King Kutter (Country Line) 72" tiller and it hooked right up to my JD 1520. I just tested it, and it worked well. Also have a King Kutter 5' rotary mower that works great on my tractor. I'm really new to this also, so keep with it. You'll figure this stuff out.
