Price Check KB2475 Backhoe

dustinfox · Oct 25, 2011

What is a good price for a KB2475 backhoe (installed) for my CK35HST?

Kiotikarl · Oct 25, 2011

Price depends on your location, call a few dealers to see the price range, thats what i did and saved nearly 1500$cnd

Be sure to have bigfoot pads added, cause that hoe will simply drag that tractor around:laughing:

flyingcow · Oct 25, 2011

not the right color, but it's 3-point hook up.

http://www.tractorbynet.com/forums/private-party-ads/221454-bx-90-x-b-h.html

wallace · Oct 26, 2011

I would look at the Woods and also a Rhino. At least with these you have a thumb option.

kiotiken · Oct 26, 2011

If memory servers, my Woods BH-70x was about $9000 installed, with thumb. It's a great BH, but the biggest difference is the mount and the thumb, and either one of those was worth the extra that I spent over the Kioti BH. I bought it with the tractor as a package.

Mousefield · Oct 26, 2011

Got a Woods BH-70X, sub frame and 18' bucket with my new CK35 HST about 3 1/2 years ago. It had the 7 position thumb included which was a must for me. Had one problem with the Woods after about 5-6 hours of use, the c clip came off the swing cylinder. Talked to my dealer in Oregon and within 6 days I had a new cylinder sent to me from Woods and had a local tractor mechanic install it, all at no cost to me of course. Price at that time before taxes was $6,050.

VictorW · Oct 26, 2011

I purchased my KB2375 6 years ago for $5500. Prices have climbed a good bit since then. Most of the time it's now $1000/foot. I could have bought a Rhino for the same price back then, but it was a five hour drive one way to get it. A Woods BH-80x would be a nice fit but a few dollars more, I think. The KB2475 doesn't have a thumb option and you'll have to get aftermarket. If your not far away, try Wallace tractor. He posted here. Great person to deal with and after the sale too.

wallace · Nov 9, 2011

I just bought a ck30 with a blown engine. I will sell the complete backhoe. Backhoe looks like it may have at the most 2 hrs on it. $6,000 takes it. comes with bucket, subframe, and subframe brackets.

dustinfox · Nov 10, 2011

wallace said:
I just bought a ck30 with a blown engine. I will sell the complete backhoe. Backhoe looks like it may have at the most 2 hrs on it. $6,000 takes it. comes with bucket, subframe, and subframe brackets.

With all due respect, I think this is to much for a used backhoe. I will need to have rear hydraulics installed (which I'm told runs about $300 or so). My dealer quoted me a new KB2475 for $7,000. This includes the rear hydraulics plus complete installation.