OP
robertestes
New member
old coil new ballast resistor
just bought 8n ford
- Thread starter robertestes
- Start date
- Views: 2387
-
- Tags
- ford 8n
GManBart
Elite Member
- Joined
- Dec 10, 2012
- Messages
- 4,976
- Location
- Detroit, Michigan
- Tractor
- Massey Ferguson 241, Kubota SVL90-2
Do you have a multi-meter to measure the resistance of the old coil, and new ballast resistor? In some cases, you need both the OEM ballast resistor, and an additional resistor to keep the current low enough to prevent cooking the old 6V coil.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
yep. oe ballast resistor always needed.
from there.. if it is a 6v coil.. you also need an 8ne10306 resistor.. or need a newer 2.5 ohm '12v' coil.. etc..
from there.. if it is a 6v coil.. you also need an 8ne10306 resistor.. or need a newer 2.5 ohm '12v' coil.. etc..
