I have a John Deere X300 bagger with a M120610 lid that has a bad seal. It looks like a regular (car type) weatherstrip. When ever I mow, grass blows up through the seal and I'm covered with grass. I checked on partscatalog.deere.com trying to come up with a part number and didn't score. Previous to this, I ordered what I thought was a correct part number and ended up with a UC12571; which didn't look like the cross section of the seal that is there, is about 20" long and is about 3' too short. Any help would be appreciated.
John Deere X300 bagger lid seal
- Thread starter drec
- Start date
- Views: 3272
-
- Tags
- john deere x300
M141911? This shows a different lid number, your number isn't in the system anymore.
dstig1
Super Member
- Joined
- Apr 7, 2010
- Messages
- 5,045
- Location
- W Wisc
- Tractor
- Kubota L5240 HSTC, JD X738 Mower, (Kubota L3130 HST - sold)
Could perhaps look for bulk gasket material that is either the same or similar. i would not be surprised to find they used something off the shelf as it makes an engineer's life easier. Mcmaster is always a good place to start
www.mcmaster.com
McMaster-Carr
McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.
www.mcmaster.com
The M120610 part was what the lid had cast into the underside of the lid. Thanks for parts link, I was able to find the correct part.
Thanks for the thought, this is what I was going to do if I couldn't find the correct part number. One of the downsides of getting old, I try not to waste my time looking for things. I've spent my life fixing and adapting; which isn't what I was looking forward to this time.
I get that point more than you know!
