shannonwatson@rocketmail.
New member
- Joined
- Jun 5, 2024
- Messages
- 2
- Tractor
- GX345
I have a GX345 John Deere with a Kawaski FD611 engine water cooled 20 HP. I have no serial number on this mower. According to John Deere the correct PTO Clutch for this unit is pn Am133209 or Am131779
The Am 133209 will not go around the crankshaft and the Am 131779 is way to big and the key will not engage between the crank shaft and the inside of the PTO.
Has anyone had this issue.
I measured the crank shaft with a tape measure and its 1 inch in diameter. any help in this matter would be great. Thanks
The Am 133209 will not go around the crankshaft and the Am 131779 is way to big and the key will not engage between the crank shaft and the inside of the PTO.
Has anyone had this issue.
I measured the crank shaft with a tape measure and its 1 inch in diameter. any help in this matter would be great. Thanks
