John Deere 8 speed powershift

[Timberjack75]

Was wondering if the 8 speed powershift trans was the same in the ag tractors as the industrial equipment of the same era? Thank you

 

[RickB]

Hop on the Deere parts website and check some numbers.

 

[buickanddeere]

Was wondering if the 8 speed powershift trans was the same in the ag tractors as the industrial equipment of the same era? Thank you

Free parts book on the JD web site which will also cross reference which machines used identical parts .

 

[Timberjack75]

Couldn't find much that crossed over, im in the logging business and it looks like I'm going to be buying an 80s vintage JD Skidder. It's fairly cheap so I'm figuring on monkeying with it. I can't see that there's a ton of difference but I've been wrong before

 

[Tx Jim]

What model is the skidder? My guess is some internal components might be shared between tractor & skidder but I doubt the trans are identical as I found i skidder with a different clutch housing than ag tractor.

 

[Timberjack75]

Thanks for the info! The Skidder is a 648D with a 6000 series winch.

 

[Tx Jim]

Some hyd clutch plates(RE234307) will interchange between Ind & Ag machines but I think a lot of other powershift trans parts won't interchange.

 

[Shadow99]

Hello Timberjack75 (Snowman)!
Let's get that new toy up here, we'll figure out the what's & how-to's later!
Your Pasquali pal,
Shadow99

 

[Timberjack75]

Don't wanna make a hasty purchase haha. Bogus used stuff can put you in the soup line pronto! Thanks for the shout out!

 

[Timberjack75]

Thanks Tx Jim! I wonder if complete clutch packs would cross? C1-C2?

 

[Tx Jim]

The part numbers for the 2 assemblies do not appear in any agricultural tractor parts catalog. The parts appear only in the 2 models listed in photo below.
HTH's,Jim

 

[Timberjack75]

Thanks again Tx Jim. I found some stuff crosses with a 670a-672a grader. I was hoping some ag tractors would cross because in my experience ag parts tend to be cheaper than industrial. It was wishful thinking on my part. Thanks again for your help