John Deere 609 Cutter Question

   / John Deere 609 Cutter Question #1  

ddivinia

Elite Member
Joined
Aug 16, 2004
Messages
3,236
Location
Red Oak, Texas
Tractor
JD 5525 and 5093e Kubota SVL75
I found a JD 609 local for $500. Seems like a good deal. I am going to go check it out this weekend.

Are they all Cat 2?

I was planning running it on my 4520 cab. I don't think the 4520 is Cat 2.

I was planning on taking this mower to my hunting place and leaving it. So I would only have to haul my 4520 when I need to work out there.

Comments?

Thanks,
D.
 
   / John Deere 609 Cutter Question #2  
Sounds like a good price. My JD dealer offered to sell me a picture of a 609 for $500........

I check my John Deere catalogs and the new ones are cat 2 and 3. The older catalog that is 15 years old says 1 and 2. You can get cat 1 pins that fit in cat 2 holes. I did a rhino twin spindle 8 footer that way and it worked great for years of tough mowing.
 
   / John Deere 609 Cutter Question #3  
According to what I find on JDparts.com all 609 cutters came from factory as Cat ll. but the pins could be changed to Cat l ,7/8" dia.
509
W22860 Stud X (A)
609 709
W22685 Stud X X (B)
(A) CATEGORY I THREE-POINT HITCH
(B) CATEGORY II THREE-POINT HITCH
 
   / John Deere 609 Cutter Question
  • Thread Starter
#4  
New 609s are like $4500.

I looked on machine finder and my dealer has a used mx6 at another lot for $975. They are going to bring it over to my local dealer next week and check it out. Spin it up, etc. I had a MX6 now and have been happy with it but have not been able to find a good price on a used one.

It is probably a good time to buy a used mower around here. There is nothing to cut with the drought. So I suspect it will all sit until Spring next year.

D.
 
   / John Deere 609 Cutter Question #5  
I found a JD 609 local for $500. Seems like a good deal. I am going to go check it out this weekend.

Are they all Cat 2?

I was planning running it on my 4520 cab. I don't think the 4520 is Cat 2.

I was planning on taking this mower to my hunting place and leaving it. So I would only have to haul my 4520 when I need to work out there.

Comments?

Thanks,
D.

Wow $500 on a 609 sounds almost too good to be true. I've been looking at those and the MX6s. The 609s are rated up to 4" stuff, as I'm sure you know :thumbsup:

If possible snap some photos..
 
   / John Deere 609 Cutter Question #7  
With the drought - nobody has anything to cut. Even the weeds are dead.

D.

Sheesh... even the hurricanes are taking a right-hand turn!

AKfish
 

Tractor & Equipment Auctions

2020 Polaris Ranger 1000 4x4 Utility Cart (A51691)
2020 Polaris...
TUBELINE TL50LSV LOT NUMBER 119 (A53084)
TUBELINE TL50LSV...
2022 KMC 5610 LOT NUMBER 212 (A53084)
2022 KMC 5610 LOT...
2008 Nissan Sentra Sedan (A51694)
2008 Nissan Sentra...
2007 Ingersoll Rand P185WJD Towable Diesel Air Compressor (A52377)
2007 Ingersoll...
2019 UTILITY 53X102 REEFER TRAILER (A52576)
2019 UTILITY...
 
Top