John Deere 4600/460 Loader SCV Valve

[rexavila]

I've got a 3-spool SCV valve installed - two to run the loader and one spool for aux - that has a part number of AM124916 stamped on it. I've got a bent spool (#1 position for bucket up/down) that I'm trying to source. John Deere doesn't have any record of that part number, but shows a new 3spool valve part number of AM124970. I'm trying hard not to buy a new $2000 valve...can anyone tell me the manufacturer/model number of the original valve, or even the new one? I may be able to match up a new spool that way. Attached a couple pictures of the numbers on the valve. There's an old post on this forum that calls my valve may be a Sauer 031A, but I've hit a dead-end chasing that down. Thanks in advance for any help!

 

[Hoss710]

here is 1 on ebay.

John Deere 4300 4400 4210 4210 4310 4410 Frontend Loader Spool Valve AM124970 | eBay

John Deere Loader spool valve AM124970. For JD4300, 4400, 4200, 4310, 4210, 4410. trailering accident. The valves do move but is stiff from sitting though can be use for parts or rebuilding.

www.ebay.com

 

[Hoss710]

I tried the 051e as a cage code but no dice. I did see a aftermarket 1 that sold on ebay for around 500. says the manufacturer is QCC

 

[Hoss710]

another used 1 I found.

Used Three Spool Valve fits John Deere AM124970

Three Spool Valve. Replaces John Deere OEM nos AM124970.

www.tractorpartsasap.com

 

[oldnslo]

Rex
What part of the spool is bent? Just curious since that is an unusual type of failure for a directional valve.

 

[Hoss710]

if the body is good, and you can get the old spool out. a new spool can be machined . I have had to make them on older equipment. any machine shop should be able to make you a replacement , if you can provide the original 1 to get measurements off of.