John Deere 110 tlb. do I need rear aux hyd.

[DocDryden]

May I ask how the 110 does with the 25a? what blades do you use on it, the 'Y' blades or the smooth cut 'spoons'

I picked up the 25a last fall, i did not have a lot time in the season to use it. I need to replace some of the blades. I will let you know this summer how the mower works. not sure what type of blades I have,

 

[DocDryden]

Thanks for the input-I do not think I will need the rear remotes-Anybody add a set using the hyd. feed for the hoe? Pictures? I thought I could rig them with the hoe feed if I found I needed them. Finding a good used machine is tough enough and I hate to let this one go too look for one with the rear Hyd. It has an all purpose bucket and aux. hyd. on the hoe which I feel will be more useful than the rear hyd on the tractor plus I am already over my budget.

A few years ago, someone on e-bay was selling a Kit to add rear remotes to your John Deere 110TLB.
I think his name was mountain_man1969, you can try to contact him.
I had saved some photos but I cant find them now ( just in case I needed the kit ).
I Agree with disney that the skid plate and out-rigger cylinder guards are a MUST HAVE for the 110.
I installed the skid plate and out-rigger cylinder guards on my 110, it cost me $700 or $800 with shipping.


skid plate


cylinder guards

 

[Zebrafive]

A few years ago, someone on e-bay was selling a Kit to add rear remotes to your John Deere 110TLB.
I think his name was mountain_man1969, you can try to contact him.
I had saved some photos but I cant find them now ( just in case I needed the kit ).
I Agree with disney that the skid plate and out-rigger cylinder guards are a MUST HAVE for the 110.
I installed the skid plate and out-rigger cylinder guards on my 110, it cost me $700 or $800 with shipping.

View attachment 366245
skid plate

View attachment 366246
cylinder guards

I think that ebay kit was to TEE into the front hydraulics and add couplers at the rear.