Jinma lost all hydraulics

   / Jinma lost all hydraulics #1  

steamer

New member
Joined
Feb 20, 2012
Messages
1
Location
Edson, alberta
Tractor
Jinma
I have lost my power steering 3PH and FEL. The quit at the same time for no apparent reason. I know this has happened to some one before.
Any advice / direction would be much appreciated.
 
   / Jinma lost all hydraulics #2  
Have you chcked fluid level? If ok, change the filter. Does it try to work a little or does it do nothing @ all?
 
   / Jinma lost all hydraulics #4  
Make sure there is good flow to the pump inlet. You can disconnect the inlet line at the pump to check it.

You can pull the pump to make sure the pump drive coupling is intact. If your power steering is a separate pump and both systems failed at once this may be the problem.
 

Tractor & Equipment Auctions

2007 MACK CV713 WINCH TRUCK (A53843)
2007 MACK CV713...
2017 FREIGHTLINER M2 BOX TRUCK (A52141)
2017 FREIGHTLINER...
2022 CATERPILLAR 242D3 SKID STEER (A51406)
2022 CATERPILLAR...
2019 GENIE GTH-5519 TELESCOPIC FORKLIFT (A52706)
2019 GENIE...
2000 WINNEBAGO FORD F550 RV (A52472)
2000 WINNEBAGO...
KMC 5610 LOT NUMBER 33 (A53084)
KMC 5610 LOT...
 
Top