jinma 254 three point hitch control lever will not move into lift position

   / jinma 254 three point hitch control lever will not move into lift position #1  

galileo268

New member
Joined
Feb 13, 2015
Messages
2
Location
kamloops bc
Tractor
jinma 254
I have a 2008 or so Jinma 254 tractor. The three point hitch lever will not move into the lift position. It easily moves from the neutral position to the lowering position and back etc. Checked the fluid level, checked the speed control knob in front of the seat.

I have attached a picture of the jammed lever and a manufacturer sketch of the parts.
Has anyone got an idea what may be causing the issue? And what is involved in fixing up the controls.
Thanks.
 

Attachments

  • three point hitch lever.jpg
    three point hitch lever.jpg
    620.3 KB · Views: 215
  • three point hitch valve.png
    three point hitch valve.png
    158.8 KB · Views: 237
   / jinma 254 three point hitch control lever will not move into lift position
  • Thread Starter
#2  
Dismantled the shifting housing and was able to find the problem. Part number 29, the pin
through shifting shaft connected to the shifting lever was broken in half. Lower part had fallen through
and jammed against the housing.
 

Tractor & Equipment Auctions

2019 Chevrolet Silverado 1500 4x4 Crew Cab Pickup Truck (A50323)
2019 Chevrolet...
24' Free Standing Panel with Swing Gate (A50515)
24' Free Standing...
2014 Ford Escape SE, Eco Boost (A52384)
2014 Ford Escape...
JLG 1055 (A50120)
JLG 1055 (A50120)
2013 FREIGHTLINER CASCADIA 125 DAY CAB (A52141)
2013 FREIGHTLINER...
John Deere 24" Backhoe Bucket (LOCAL TOWNSHIP) (A50774)
John Deere 24"...
 
Top