JD 5075E and a JD 459E baler

   / JD 5075E and a JD 459E baler #11  
Ahhhh.... that makes perfect sense. I've been looking at balers lately and definitely want net wrap. I thought you might be candidate for a possible sale but not if yours is twine. :laughing:
 
   / JD 5075E and a JD 459E baler #12  
I know this is not exactly the thread topic, but given the concern about how big of a bale a 5075 would turn, I think it may be helpful. I bought a new 5075e this summer with 4wd and cab, chloride in all tires. I have a Vermeer 605J baler that I had been pulling with a JD 4020 (95hp). I makes a 6 ft round bale. The bailer manual recommends 80 HP minimun. I really wasnt sure if my 5075 could replace my "big" 4020. Now three cutting done, let me say with no hesitation that 5075 has more than enough horsepower to pull that baler including up and down rolling hills. Hope this post helps others gage 5075e capability. It also pulls a 14ft haybine fine. I am very pleased with JD "economy" tractor.
 

Tractor & Equipment Auctions

2020 Kubota Z723KH 48in. Zero Turn Commercial Mower (A50324)
2020 Kubota Z723KH...
2014 VOLVO VN SERIES DAY CAB (A50854)
2014 VOLVO VN...
2015 DODGE RAM 1500 CREW CAB TRUCK (A51406)
2015 DODGE RAM...
2018 FORD EXPEDITION (A51406)
2018 FORD...
71067 (A49346)
71067 (A49346)
JOHN DEERE 544G (A50854)
JOHN DEERE 544G...
 
Top