JD 4600/ 460 loader bucket tilt

[Hound Dog]

The two cylinders that tilt the bucket aren't synchronizing all the time. The right cylinder is moves faster than the left one. There is a 'torsion bar' that connects the two sides but one side was breaking the small (1/4"?) pins so I drilled it out and pounded in a 5/16" roll pin. I don't know how long that will last. It's a PIB when changing from hay spear to bucket, etc. Anyone have this problem or ideas on how to fix it? Maybe bleed lines between cylinders? Thought I would ask before making a mess.

TIA

 

[Hound Dog]

Now I found this, so maybe the pin will solve the problem.

https://www.tractorbynet.com/forums/attachments/203334-460-loader-tilt-cylender-lag.html

 

[RNeumann]

I think it’s time to test the cylinders. One May need a rebuild......just my SWAG.

 

[kennyd]

Now I found this, so maybe the pin will solve the problem.

https://www.tractorbynet.com/forums/attachments/203334-460-loader-tilt-cylender-lag.html

Yes, most likely 100% normal, especially if the two shear pins are intact.