JD 2550 Jerking hydraulics at low rpm
- Thread starter richardga
- Start date
- Views: 419
Tx Jim
New Member
Welcome to this forum
How many hrs of use since hyd oil level was checked, hyd filter changed & hyd oil suction screen checked/cleaned???? 3pt dropping after stopping operation of engine could be caused from failed rockshaft piston seals or leaking rockshaft control valves. With hyd oil at operating temp, engine operating, 3 pt raised look into open hyd filler hole behind seat for moving/spraying oil. Moving oil indicates afore mentioned internal hyd leak locations.
How many hrs of use since hyd oil level was checked, hyd filter changed & hyd oil suction screen checked/cleaned???? 3pt dropping after stopping operation of engine could be caused from failed rockshaft piston seals or leaking rockshaft control valves. With hyd oil at operating temp, engine operating, 3 pt raised look into open hyd filler hole behind seat for moving/spraying oil. Moving oil indicates afore mentioned internal hyd leak locations.
Attachments
jeff9366
Super Star Member
- Joined
- Jan 14, 2011
- Messages
- 12,777
- Tractor
- Kubota Tractor Loader L3560 HST+ ~~~~~~~~~~~~~ 3,700 pounds bare tractor, 5,400 pounds operating weight, 37 horsepower
Which tractor do you have?
JD 2550
John Deere 2020
JD 2550 JERKING HYDRAULICS AT LOW RPMJD 2550
John Deere 2020
What is tractor tachometer reading at "low" rpm?
Last edited: