loganhorse
Bronze Member
Whats the recommendation for pressure on a 2440 with loader? Rear has fluid.
My rear one looks low since temp has changed.
My rear one looks low since temp has changed.
JD 2440 16.9x30 Pressure
- Thread starter loganhorse
- Start date
- Views: 3047
-
- Tags
- john deere 2440
Texasmark
Elite Member
- Joined
- Apr 24, 2012
- Messages
- 3,703
- Location
- N. Texas
- Tractor
- Ford: '88 3910 Series II, '80 3600, '65 3000; '07 6530C Branson with FEL, 2020 LS MT225S. Case-IH 395 and 895 with cab. All Diesels
Look on the tire sidewall for the max rating. Actual pressure depends on load, tire size/type and number of plies. 4 ply ratings usually run at 35 psig max, 6 ply 45-50, 8 ply 60 and so on.
However, 4 ply 13.6 x 28 F1 (ag) rears on my Fords are rated 18 psig max. I have 3 different manufacturers involved in the 3 Ford's tires and all are the same size/plies and have the same max pressure rating. An F4 of that size in industrial probably would be 8-10 ply and rated 60 or better max....don't know, just speculating on the F4s.
However, 4 ply 13.6 x 28 F1 (ag) rears on my Fords are rated 18 psig max. I have 3 different manufacturers involved in the 3 Ford's tires and all are the same size/plies and have the same max pressure rating. An F4 of that size in industrial probably would be 8-10 ply and rated 60 or better max....don't know, just speculating on the F4s.
