JD 2240: Rebuilding my 3PH
- Thread starter dcyrilc
- Start date
- Views: 19353
-
- Tags
- john deere 2240
OP
dcyrilc
Elite Member
OK, it might have been a little bigger than 60", but she really did say she like them.
RadarTech
Elite Member
OK, it might have been a little bigger than 60", but she really did say she like them.
why do I still not believe you??? :laughing:
now if I come for a steak and you try to give me a "16 oz" one--- I think I may have to whip out a scale!!!!
J
OP
dcyrilc
Elite Member
why do I still not believe you??? :laughing:
now if I come for a steak and you try to give me a "16 oz" one--- I think I may have to whip out a scale!!!!
J
Our steaks are more like 8 oz. They sure taste good though.:thumbsup:
RadarTech
Elite Member
now that I can believe....
Hey-- be sure to chime in on the TBN Jacket bid. thread...
J
OP
dcyrilc
Elite Member
I'll go look for it.
Johndeere3720
Padawan Tractor Learner, Advertiser
- Joined
- Mar 14, 2009
- Messages
- 3,964
- Location
- NW Oregon
- Tractor
- Bobcat T62, MT55, E42R, E10, John Deere 4100
Im guessing the tractor started out as a 2305?:laughing: Maybe i shold bring my tractors to washington so they can "grow".:laughing:
cycle_gator
Silver Member
- Joined
- Aug 2, 2009
- Messages
- 243
- Location
- Port Orchard, WA
- Tractor
- Kubota L4310 GST;Case 580 CK (1968)
Cyril:
First of all, very nice thread. I really enjoyed vicariously watching you get your hands slimy with hydraulic fluid. I have always wondered what the innards of a three point look like. now I know. I have to admit that I have not dropped a socket into quite that unrecoverable of a spot, tough, but not that tough. It reminds me if I ever need to do somthing like that, sacrifice a socket and an extension with a spot weld.
Egon:
Just make sure you bring that machine to the proper part of the state, west of the mountains. Average rainfall 30 to 36" per year, little at a time, all the time. BTW it has not gotten above 75 degress in Seattle yet this year, a new record by more than three weeks.
Now east of the rocks the climate will preserve and shrink that machine with rainfall at less than 10" per year up to about 15." Most of that is in winter time snow. Has been a bit chilly over there this spring as well, not been much above 90 yet. Wheat farmers are compaining about rust. First time ever.
So, make sure and ship that green machine what needs growin' to somewhere around Seattle, unless you wanna get a jump start on the growth, then send it to Forks (where all them vampires hang out) 130" of annual rainfall. It'll grow quick and it is a good thing it has green blood, it'll be safe from the toothy ones.
First of all, very nice thread. I really enjoyed vicariously watching you get your hands slimy with hydraulic fluid. I have always wondered what the innards of a three point look like. now I know. I have to admit that I have not dropped a socket into quite that unrecoverable of a spot, tough, but not that tough. It reminds me if I ever need to do somthing like that, sacrifice a socket and an extension with a spot weld.
Egon:
Just make sure you bring that machine to the proper part of the state, west of the mountains. Average rainfall 30 to 36" per year, little at a time, all the time. BTW it has not gotten above 75 degress in Seattle yet this year, a new record by more than three weeks.
Now east of the rocks the climate will preserve and shrink that machine with rainfall at less than 10" per year up to about 15." Most of that is in winter time snow. Has been a bit chilly over there this spring as well, not been much above 90 yet. Wheat farmers are compaining about rust. First time ever.
So, make sure and ship that green machine what needs growin' to somewhere around Seattle, unless you wanna get a jump start on the growth, then send it to Forks (where all them vampires hang out) 130" of annual rainfall. It'll grow quick and it is a good thing it has green blood, it'll be safe from the toothy ones.
cycle_gator
Silver Member
- Joined
- Aug 2, 2009
- Messages
- 243
- Location
- Port Orchard, WA
- Tractor
- Kubota L4310 GST;Case 580 CK (1968)
RadarTech:
Sorry that comment about shippin your machine was to you. I am reading too many threads tonight and got confused.
Sorry that comment about shippin your machine was to you. I am reading too many threads tonight and got confused.
OP
dcyrilc
Elite Member
cycle_gator,
Have you had any thoughts about comming over for the picnic in August? http://www.tractorbynet.com/forums/related-topics/170534-how-do-you-like-your.html
Have you had any thoughts about comming over for the picnic in August? http://www.tractorbynet.com/forums/related-topics/170534-how-do-you-like-your.html
