JD 2210 Heater Hose Connections

[MrGraffix]

I recently finished building a cab for my 2210 and am in the process of making my own heater using a chevette heater core and a 130cfm dc muffin fan. Myy question is how or where do i tap into coolant lines? I see where curtis cabs uses a sending unit adaptor but since I didn't ordder their heater I don't have this special adaptor. Is there anywhere else I can tap into using a standard tee?

 

[kjung17]

I found some information on the 2210 cooling system. Ideally, you would tap in near the rear of the head , route the coolant through your heater core and return it to the thermostat housing. Installing your heater core in-line on the bypass tube may be easier.

 

[Huskerplowboy]

http://www.jodaleperry.com/manuals/johndeere/BOXER_JD_2210_2305_Mount_Instructions.pdf

Jodale Perry (who make some really cool looking cabs for our little tractors) have some info on hooking up their heater to the 2210...

 

[Huskerplowboy]

http://www.jodaleperry.com/manuals/johndeere/BOXER_JD_2x20_mounting.pdf

This manual has some better pics. It's for the 2320, but I'd guess the Yanmar engine is pretty similar on the 2210...

 

[MrGraffix]

hanks guys for the replies and links. Will check them out in a bit. Huskerplowboy I agree on those perry cabs...extremely sweet looking. I could live in that thing...but I'd have to sell the tractor to afford one LOL. And yeah I believe our Yanmars are identical! At least the 2305 and 2320.