JD 1070 Power Beyond Kit

   / JD 1070 Power Beyond Kit #1  

wkpoor

Platinum Member
Joined
Jan 14, 2007
Messages
613
Location
Amanda, OH
Tractor
John Deere 5400, Farmall H, Farmall Cub, Allis Chalmers CA
Got a buddy who wants to put a grapple on his 1070. I know Deere sells a rear remote kit I'm told is for a backhoe that is the same a PB but I'm wondering if the kit is even really needed as he plans on putting a valve up on the loader frame and would run the hoses straight there instead of the back. Anyone have any real experience doing this? BTW I did find a year old thread covering this but I would like some up to date "yeh I did this and it works" and here how I did it.
 
   / JD 1070 Power Beyond Kit #2  
I haven't done it on a 1070, but did on my 4110...You can look in JDParts and see where the line connect to, then it's just a matter of getting the right fittings and hoses. If your looking for a detailed list for the 1070, I don't think you find it.
 
   / JD 1070 Power Beyond Kit
  • Thread Starter
#3  
I've been there and even went to the dealer. All they could say was order the kit. I don't think all the pieces in the kit are necessary. Plus I don't have a manual that might show something in detail about the power beyond ports. I'm thinking this an be done with way fewer parts.
 
   / JD 1070 Power Beyond Kit #4  
It can be...once you identify the ports, then all is needed is two hoses and a valve.
 
   / JD 1070 Power Beyond Kit
  • Thread Starter
#5  
Thanks
 

Tractor & Equipment Auctions

TC710 FINISHING MOWER (A50459)
TC710 FINISHING...
7022 (A50322)
7022 (A50322)
2018 Nissan Pathfinder SUV (A50324)
2018 Nissan...
2011 CATERPILLAR M318D MOBILE EXCAVATOR (A51242)
2011 CATERPILLAR...
2014 PJ 24+6 T/A GOOSENECK (A50854)
2014 PJ 24+6 T/A...
12in Backhoe Bucket (A51039)
12in Backhoe...
 
Top