Iseki TU1700 Transfer Case Input Cover

[APC]

Anyone out there have an input cover for an Iseki TU1700 or any ideas how to get one (cover where the engine and 4WD shafts enter/exit)? No luck with the usual suppliers, the part is not in stock/production and the cover is beyond repair.

Thanks

 

[Kernopelli]

Probably have to find a salvage part. West Kentucky Tractor Parts has a TU1700 parts machine listed on their site.

 

[APC]

So I did call around to a few places, including West Kentucky, Sheaffer's,Southern Global, and Hoye's but nobody has a cover. (West Kentucky did, but sold it a while back). Now I'm just trying to track down someone like me who has a dead tractor in the yard for parts. If I can't find a cover I'll be parting this one out.

 

[Kernopelli]

Iseki made a TON of different TU models and about 10 different TU models between 15 HP and 18 HP. I will bet that at least several of these models use many of the same parts/components as the 170. I would try to do some investigating and see what other models might have used this same part.