iseki 1610

[Anonymous Poster]

can anyone tell me anything about this tractor. weight, hp any info will help. THANKS

 

[Anonymous Poster]

I just bought a Iseki TS 1610. Its a real nice little tractor.
Dealer told me it was 20hp. I think I am going to like it just fine. Seems to have good power and everything works just great. Can anyone give me an Oil Filter No. ?

 

[Anonymous Poster]

Hey.....usually, and I am no expert, the first two numbers of the model number are the horsepower rating. There is another rating at the PTO; but I havent gotten that one figured out. Perhaps a more knowledgeable operator can give us insight.....Dennis

 

[DavidD]

I have a Fram PH3600 on my TS1610

 

[buppy69]

The first two numbers of the model number are PTO HP. To get engine HP, multiply PTO HP X 1.3.

Eugene

 

[Anonymous Poster]

I found a small plate on my TS 1610 that says
16 PS 2300rpm. Does any one know if this is the Pto hp?

 

[DavidD]

I was told that my TS1610 was 16hp at the pto and around 20-21 for the engine. I have really put some loads on mine and all it does is spin all four tires, that's plenty of HP for it's weight in my opinion. They seem to have plenty of gears for whatever job it is doing, as long as you don't get in a hurry.

 

[Anonymous Poster]

hey guys, thanks for all the info. I was looking at 2 small tractors.the mf 1010 and Iseki 1610. I brought the 1610. I will pick up next week. Thanks again!

 

[buppy69]

The MF1010 is the same as a Hinomoto C142/144. 14 PTO HP. The Iseki is a good choice.

Eugene

 

[Anonymous Poster]

According to Eugenes formula if the 1610 has a 16hp PTO.
Then the HP of the 1610 would be 20.8 HP.
1.3 X 16 = 20.8.
Thanks a lot Guys.