Price Check Is this 790 price good?

[pd444]

4-wd 790
419 FEL
LX5 Rotary cutter
BH SBX 5ft box blade

$15,500.

IF I were to buy...what's I-Match (or whatever) and should I get it?
Do I need weights?
Any other thoughts?
I've been leaning Kubota, but local JD dealer is having this sale and I like the idea that they have two dealerships, equidistant from the house.

 

[790guy]

Got my 790/419fel for $13,300 last month.

 

[RoyJackson]

Doesn't sound too bad to me, since you're getting the cutter and the box blade. I do think I'd try to negotiate a bit more...maybe get your first service (including pick up and delivery) in the package.

I recently purchased a 2003 790 w/ 419 Loader for $12500. This was a used machine but only had 24 hours on it when delivered (although a nice tractor, it wasn't big enough for the original buyer who traded it for a 990).

The Imatch is a system to make it easier to hook up implements. I've never used it, so I cannot comment. I did purchase the "Pat's Easy Change" system. This works pretty good and is probably quite a bit cheaper then the IMatch. However, the "Pat's" system only works on the lower link hook ups. I believe IMatch works on the lower and upper links...

As far as front weights...that depends on what you'll use the tractor for. Since you got a rotary cutter, I reckon you'll be doing field mowing. I keep the loader on when I'm doing that kind of work so I don't use them. Same thing applies when I've got the backblade mounted. When the finishing mower is on the 3PH, I've never found any front end lightness. So, can't say I ever had need of the front weights. If you do think you need them, I'd see if the dealer would toss them in as part of the $15.5K price.

Anyway, now you have two prices to compare with.

 

[GONO2]

Sounds a little high to me - Mines on order - 790 4x4 R4 tires (filled rear), 419 Loader, LX5 cutter, Fronter 72" box blade, 655 Tiller - $15,700 /forums/images/graemlins/smile.gif

 

[Bellville]

Here is what I paid last October,
790 MFWD
419 Loader
LX5
5' Box Blade
PHD

15,100.00

Sounds like you have a little room to negotiate.

 

[Gunfighter]

Get the I-Match , you won't regret it. It simplifies hooking up 3 point equipment...
Didn't get mine with the tractor but ended up buying from TSC a year later.
Some of my implements were not compatible but with modification they are
now. The little gizmo can save allot of cursing...

RJK Sr. (Richard)
West Michigan

 

[pd444]

When you say modification, does that mean that any future attachment would need to be modified?

If I were to borrow an attachment that wasn't already modified, would the changes be something that could be "undone"?

pd

 

[zuiko]

The issue is the pins need to be a certain width apart. You want to get imatch compatible implements if you want them to work with imatch. Also if you use a PHD that isn't going to work with imatch. I went with Pat's Easy Change for these reasons and it's great.

 

[Gunfighter]

If your going with all John Deere implement, your'll already
set up for I Match. and don't need any other modification...

Also allot of the new 3 point equipment is being standardize
to fit I Match but some of the older stuff may need adjustment.

There is nothing I did to the impalements to prevent them from
being used with a regular 3 point hitch without I Match. All you'd
need to do is pull the sleeves...

Had one piece of equipment that needed welding but it'll still
work with any 3 pt hitch. My biggest problem was the top hook
so I replaced it with some flat iron with proper size holes...

RJK Sr.. (Richard)
West Michigan