Is the 1110D made for 3pt hookup?

[mrtractortire]

When I got my yanmar 1110d, it had a tiller on the back, which was great, until I took it off and tried to put on the bars for 3pt. hookup. Are there supposed to be anti-sway chains, and if so where do they go? If I put the plow or scrape blade on, it sways freely left and right, so much so that the bars hit the tires. Its kind of annoying when I am on the side of a hill. What do I do?

 

[mark777]

On a couple of my tractors I made 1/4" x3"x2" drilled flat stock and mounted to the far end of axle tube. Bolted pre cut chain to those and the arms snugly. Works fine for all implements so far. Also put wheels at maximum width for more clearance.
Regards, Mark

 

[Soundguy]

Like mark said.. most of us find a way to attatch some chain limiters to prevent implement/tire contact.

On my first day with my boxblade on my ym1700 I made an attractive metal pretzel out of my adjustable link arm when the box blade caught and rode up on the rice tire.

Soundguy

 

[gbirky]

Take a look at my web page for what I did for sway chains.