Is it bad for the engine to lug too much???

   / Is it bad for the engine to lug too much??? #21  
One situation that is really bad on a diesel is to lug it so hard that the rpm drop to the point the oil pressure starts to drop. My neighbor would run his tractor up a steep grade he needed to shift down but would let the tractor slowly lug down to the point the tractor would nearly stall with black smoke rolling. Really hard on the crank and rod bearings with the oil pressure low and hammering hard on the crank is just a bad combo. That tractor is now in the junk row on their farm. Wonder why.:confused:
 
Last edited:
   / Is it bad for the engine to lug too much??? #22  
I think I would either raise the height of the cut, or take smaller bites.
 
   / Is it bad for the engine to lug too much??? #23  
I think I would either raise the height of the cut, or take smaller bites.

Yep, I agree...
Can't see any good reason to let an engine lug. If it is lugging, you're trying to do more then the tractor can.
 
   / Is it bad for the engine to lug too much??? #24  
Yep, I agree...
Can't see any good reason to let an engine lug. If it is lugging, you're trying to do more then the tractor can.

time to downshift or take a smaller bite!
 
   / Is it bad for the engine to lug too much??? #25  
Sounds like normal use of power to me momentary heavy loads never hurts an engine unless it's about to fall apart any way. Just keep an eye on the temp gauge.
 

Tractor & Equipment Auctions

2004 Sterling L8500 4,000 Gallon T/A Water Truck (A50323)
2004 Sterling...
2016 Case CX55B Mini Excavator (A49461)
2016 Case CX55B...
1993 Ingersoll Rand 185 S/A Towable Air Compressor (A49461)
1993 Ingersoll...
2007 TROXELL KILL/TRANSPORT TRAILER (A50854)
2007 TROXELL...
4- 6 DRILL COLLARS (A50854)
4- 6 DRILL COLLARS...
2014 STEPHENS 200BBL TANKER TRAILER (A50854)
2014 STEPHENS...
 
Top